VES sensor reading implausible. Wiring faults of this kind typically come from chafing, water ingress at connector seals, or pin push-back — a wiggle test on the harness while the code is active often confirms the location.
High severity. Can I keep driving?If the steering feels stiff or uneven, drive slowly and go to a repair shop or call for roadside assistance. It is a safety system.
Symptoms
- ABS warning light on
- ESC/stability control deactivated
- Possible reduced brake assist
- Speedometer may behave erratically
Most likely causes
- Sensor reading drifted
- Sensor element aged beyond calibration window
- Sensor mounting loose - signal damping
What to check, in order
Start with the simplest. You can tick off each step.
Good to know
- Repair difficulty: medium
- It can trigger limp mode.
What each character of C0625 means
- C: Chassis
- 0: Generic code: same on every make
- 6: Subsystem depends on the code range
- 25: Specific fault in that system
Frequently asked questions
Can I keep driving with code C0625?
If the steering feels stiff or uneven, drive slowly and go to a repair shop or call for roadside assistance. It is a safety system.
What causes code C0625?
The most common causes are: sensor reading drifted; sensor element aged beyond calibration window; sensor mounting loose - signal damping.
Sources
Values and procedures vary by manufacturer. If it affects brakes, steering, fuel or high voltage, see a professional. Updated: 2026-11-04. How we build these pages.