CodesBrandsGuidesTutorials
EN
EnglishEspaƱolDeutsch

P00DA: Ambient Air Temperature Sensor Circuit B Range/Performance

Ambient air temperature sensor B is a second, separate ambient temperature circuit in addition to sensor A. What the second measuring point is used for in a given vehicle could not be documented; the value may be wired directly to the control module or come over the data bus. Regulations require monitoring of such inputs because ambient temperature is often an enabling condition for other diagnostics. None of the manufacturer documents searched uses these codes; the explanation follows sensor A. P00DA: This is a plausibility fault: after a long standstill the reading is compared with other temperatures, which should then agree.

Low severity. Can I keep driving?Yes, you can normally keep driving and take it to a repair shop when convenient.

Symptoms

  • Wrong or missing outside temperature display
  • Climate control regulates incorrectly
  • Check engine light on (manufacturer-dependent)

Most likely causes

  • Sensor in a heat-affected position (engine, sun)
  • Comparison sensor faulty
  • Sensor drifting
  • Control module faulty

What to check, in order

Start with the simplest. You can tick off each step.

Good to know

  • Repair difficulty: easy
  • It affects emissions.

What each character of P00DA means

  • P: Powertrain: engine and transmission
  • 0: Generic code: same on every make
  • 0: Subsystem depends on the code range
  • DA: Specific fault in that system

Frequently asked questions

Can I keep driving with code P00DA?

Yes, you can normally keep driving and take it to a repair shop when convenient.

What causes code P00DA?

The most common causes are: sensor in a heat-affected position (engine, sun); comparison sensor faulty; sensor drifting.

Related codes

Sources

Values and procedures vary by manufacturer. If it affects brakes, steering, fuel or high voltage, see a professional. Updated: 2026-11-04. How we build these pages.