P27BE: Pressure Control Solenoid N Control Circuit Range/Performance

The current through pressure control solenoid N does not match the commanded value within tolerance.

Medium severity. Can I keep driving?Drive as little as possible and gently. If the transmission slips or stays in one gear, go slowly to a repair shop or call for a tow truck.

Most likely causes

Coil resistance changed by thermal stress
High-resistance contact in solenoid connector
Sensor element aged beyond calibration window

What to check, in order

Start with the simplest. You can tick off each step.

Check the fluid level and condition according to the manufacturer
Compare the reading with other engine data while varying the engine speed.
Check the transmission connector
Read the data with a transmission-compatible scanner
Measure the solenoid valve circuit
Leave opening the transmission to a specialized repair shop

Good to know

Repair difficulty: hard

What each character of P27BE means

P: Powertrain: engine and transmission
2: Generic code: same on every make
7: Transmission
BE: Specific fault in that system

Frequently asked questions

Can I keep driving with code P27BE?

Drive as little as possible and gently. If the transmission slips or stays in one gear, go slowly to a repair shop or call for a tow truck.

What causes code P27BE?

The most common causes are: coil resistance changed by thermal stress; high-resistance contact in solenoid connector; sensor element aged beyond calibration window.

Related codes

Sources

Values and procedures vary by manufacturer. If it affects brakes, steering, fuel or high voltage, see a professional. Updated: 2026-11-04. How we build these pages.