P283B: Shift Fork C Position Circuit

The TCM cannot read a valid position signal from shift fork C position sensor. Selector engagement state is unknown.

Medium severity. Can I keep driving?Drive as little as possible and gently. If the transmission slips or stays in one gear, go slowly to a repair shop or call for a tow truck.

Symptoms

Check engine or transmission warning light on
Harsh, delayed, or missing shifts
Possible limp mode (locked in one gear)
Slipping or shuddering during gear changes

Most likely causes

Position sensor failed
Wiring or connector fault

What to check, in order

Start with the simplest. You can tick off each step.

Check the fluid level and condition according to the manufacturer
Check the transmission connector
Read the data with a transmission-compatible scanner
Measure the solenoid valve circuit
Leave opening the transmission to a specialized repair shop

Good to know

Repair difficulty: hard
It can trigger limp mode.

What each character of P283B means

P: Powertrain: engine and transmission
2: Generic code: same on every make
8: Transmission
3B: Specific fault in that system

Frequently asked questions

Can I keep driving with code P283B?

Drive as little as possible and gently. If the transmission slips or stays in one gear, go slowly to a repair shop or call for a tow truck.

What causes code P283B?

The most common causes are: position sensor failed; wiring or connector fault.

Related codes

Sources

Values and procedures vary by manufacturer. If it affects brakes, steering, fuel or high voltage, see a professional. Updated: 2026-11-04. How we build these pages.