The TCM has not learned the end-stop calibration for shift fork B. Engagement positions cannot be commanded with full precision until adaptation completes.
Medium severity. Can I keep driving?Drive as little as possible and gently. If the transmission slips or stays in one gear, go slowly to a repair shop or call for a tow truck.
Symptoms
- Check engine or transmission warning light on
- Harsh, delayed, or missing shifts
- Possible limp mode (locked in one gear)
- Slipping or shuddering during gear changes
Most likely causes
- Adaptation lost after battery disconnect or TCM reset
- Shift fork replaced without learn procedure
What to check, in order
Start with the simplest. You can tick off each step.
Good to know
- Repair difficulty: easy
What each character of P288D means
- P: Powertrain: engine and transmission
- 2: Generic code: same on every make
- 8: Transmission
- 8D: Specific fault in that system
Frequently asked questions
Can I keep driving with code P288D?
Drive as little as possible and gently. If the transmission slips or stays in one gear, go slowly to a repair shop or call for a tow truck.
What causes code P288D?
The most common causes are: adaptation lost after battery disconnect or TCM reset; shift fork replaced without learn procedure.
Related codes
Sources
Values and procedures vary by manufacturer. If it affects brakes, steering, fuel or high voltage, see a professional. Updated: 2026-11-04. How we build these pages.