CodesBrandsGuidesTutorials
EN
EnglishEspaƱolDeutsch

P2BAC: NOx Exceedence - Deactivation of EGR

P2BAC means NOx emissions exceed the permitted level and the module attributes it to this cause: the EGR system has been switched off or is being bypassed, so engine-out NOx rises. The NOx exceedance codes P2BA6 to P2BAE follow the list of causes that EU heavy-duty rules require to be identified for operator inducement (empty tank, interrupted dosing, poor reagent quality, low consumption, EGR faults, monitoring faults). Depending on the market, a persisting fault leads to warnings and then to power or speed limits.

Medium severity. Can I keep driving?You can usually keep driving in the short term, but get it repaired soon: on many diesels, the warning eventually limits starting or engine power.

Symptoms

  • Check engine or NOx warning light on
  • Driver warning, later power or speed limitation

Most likely causes

  • EGR valve unplugged, blocked or deactivated
  • EGR actuator failed

What to check, in order

Start with the simplest. You can tick off each step.

Good to know

  • Repair difficulty: hard
  • It can trigger limp mode.
  • It affects emissions.

What each character of P2BAC means

  • P: Powertrain: engine and transmission
  • 2: Generic code: same on every make
  • B: Subsystem depends on the code range
  • AC: Specific fault in that system

Frequently asked questions

Can I keep driving with code P2BAC?

You can usually keep driving in the short term, but get it repaired soon: on many diesels, the warning eventually limits starting or engine power.

What causes code P2BAC?

The most common causes are: eGR valve unplugged, blocked or deactivated; eGR actuator failed.

Related codes

Sources

Values and procedures vary by manufacturer. If it affects brakes, steering, fuel or high voltage, see a professional. Updated: 2026-11-04. How we build these pages.