P2D87: Fan 1 Control Module Over Temperature

The fan 1 control module reports temperature above the protection threshold. Sustained operation, high ambient, or cooling path obstruction.

Most likely causes

• Under-bonnet temperature too high
• Sustained fan operation

What to check, in order

Start with the simplest. You can tick off each step.

1. With the engine cold, check the coolant level; never do this when the system is hot
2. Check the actual temperature in live data
3. Make sure the fan comes on when it should
4. Check the thermostat and connector
5. Measure the sensor and replace it if its readings do not make sense

Good to know

• Repair difficulty: medium
• It can trigger limp mode.

What each character of P2D87 means

• P: Powertrain: engine and transmission
• 2: Generic code: same on every make
• D: Subsystem depends on the code range
• 87: Specific fault in that system

Frequently asked questions

Can I keep driving with code P2D87?

Watch the temperature gauge. If it climbs or a warning appears, stop the car in a safe place and turn off the engine: overheating can cause serious damage.

What causes code P2D87?

The most common causes are: under-bonnet temperature too high; sustained fan operation.

Sources

• github.com: dtc database
• en.wikipedia.org: On board diagnostics

Values and procedures vary by manufacturer. If it affects brakes, steering, fuel or high voltage, see a professional. Updated: 2026-11-04. How we build these pages.