The communication bus A high-side line (CAN-H or equivalent) is at a higher voltage than allowed. Likely short to power or a transceiver fault that pulls the line high.
Medium severity. Can I keep driving?It depends on which control module has dropped out. If it affects the engine, brakes, or steering, do not continue your trip: call for roadside assistance.
Symptoms
- Multiple warning lights may illuminate
- Affected modules may go into limp mode or shut down
- Specific functions inoperative depending on module
- Diagnostic tools may show communication faults
Most likely causes
- Bus high line shorted to battery
- Transceiver in one node failed
- Gateway module routing CAN messages incorrectly
What to check, in order
Start with the simplest. You can tick off each step.
Good to know
- Repair difficulty: hard
- It can trigger limp mode.
What each character of U0032 means
- U: Communication network
- 0: Generic code: same on every make
- 0: Subsystem depends on the code range
- 32: Specific fault in that system
Frequently asked questions
Can I keep driving with code U0032?
It depends on which control module has dropped out. If it affects the engine, brakes, or steering, do not continue your trip: call for roadside assistance.
What causes code U0032?
The most common causes are: bus high line shorted to battery; transceiver in one node failed; gateway module routing CAN messages incorrectly.
Related codes
- U0041Vehicle Communication Bus B (+) High
- U0059Vehicle Communication Bus D (+) High
- U0068Vehicle Communication Bus E (+) High
- U0080Vehicle Communication Bus F
- U008DVehicle Communication Bus G (+) High
- U0096Vehicle Communication Bus H (+) High
Sources
Values and procedures vary by manufacturer. If it affects brakes, steering, fuel or high voltage, see a professional. Updated: 2026-11-04. How we build these pages.