CodesBrandsGuidesTutorials
EN
EnglishEspañolDeutsch

U017C: Lost Communication With Restraints System Sensor M

ECU lost CAN/dedicated-bus communication with restraints system sensor M (airbag/seatbelt sensor). A communication loss with this module breaks any function relying on its data — diagnostic tools may show 'no response' and dependent modules can fall into limp mode.

Medium severity. Can I keep driving?It depends on which control module has dropped out. If it affects the engine, brakes, or steering, do not continue your trip: call for roadside assistance.

Symptoms

  • Multiple warning lights may illuminate
  • Affected modules may go into limp mode or shut down
  • Specific functions inoperative depending on module
  • Diagnostic tools may show communication faults

Most likely causes

  • Sensor unpowered or wiring broken
  • Gateway module routing CAN messages incorrectly
  • CAN terminating resistor (120 Ω) drifted out of spec

What to check, in order

Start with the simplest. You can tick off each step.

Good to know

  • Repair difficulty: medium

What each character of U017C means

  • U: Communication network
  • 0: Generic code: same on every make
  • 1: Subsystem depends on the code range
  • 7C: Specific fault in that system

Frequently asked questions

Can I keep driving with code U017C?

It depends on which control module has dropped out. If it affects the engine, brakes, or steering, do not continue your trip: call for roadside assistance.

What causes code U017C?

The most common causes are: sensor unpowered or wiring broken; gateway module routing CAN messages incorrectly; cAN terminating resistor (120 Ω) drifted out of spec.

Related codes

Sources

Values and procedures vary by manufacturer. If it affects brakes, steering, fuel or high voltage, see a professional. Updated: 2026-11-04. How we build these pages.