The vehicle bus reports loss of communication with smart IAT sensor 1 on bank 1. Charge-air density correction reverts to a substitute value.
Medium severity. Can I keep driving?It depends on which control module has dropped out. If it affects the engine, brakes, or steering, do not continue your trip: call for roadside assistance.
Bank 1 is the side of the engine with cylinder 1. Inline engines only have this bank.
Symptoms
- Multiple warning lights may illuminate
- Affected modules may go into limp mode or shut down
- Specific functions inoperative depending on module
- Diagnostic tools may show communication faults
Most likely causes
- Bus wiring open or shorted
- Module without power or ground
- Module failed
What to check, in order
Start with the simplest. You can tick off each step.
Good to know
- Repair difficulty: easy
- It affects emissions.
What each character of U0611 means
- U: Communication network
- 0: Generic code: same on every make
- 6: Subsystem depends on the code range
- 11: Specific fault in that system
Frequently asked questions
Can I keep driving with code U0611?
It depends on which control module has dropped out. If it affects the engine, brakes, or steering, do not continue your trip: call for roadside assistance.
What causes code U0611?
The most common causes are: bus wiring open or shorted; module without power or ground; module failed.
Related codes
- U0612Lost Communication With Intake Air Temperature Sensor 1 Bank 2
- U0613Lost Communication With Intake Air Temperature Sensor 2 Bank 1
- U0614Lost Communication With Intake Air Temperature Sensor 2 Bank 2
Sources
Values and procedures vary by manufacturer. If it affects brakes, steering, fuel or high voltage, see a professional. Updated: 2026-11-04. How we build these pages.