Control Module Input Power Circuit B - Ignition Input On/Start Circuit Correlation: the value does not correlate with the related sensor or expected pattern.
Medium severity. Can I keep driving?It depends on which control module has dropped out. If it affects the engine, brakes, or steering, do not continue your trip: call for roadside assistance.
Symptoms
- Multiple warning lights may illuminate
- Affected modules may go into limp mode or shut down
- Specific functions inoperative depending on module
- Diagnostic tools may show communication faults
Most likely causes
- Wiring or relay fault
- Gateway module routing CAN messages incorrectly
- CAN terminating resistor (120 Ω) drifted out of spec
What to check, in order
Start with the simplest. You can tick off each step.
Good to know
- Repair difficulty: medium
What each character of U3024 means
- U: Communication network
- 3: Generic code: same on every make
- 0: Subsystem depends on the code range
- 24: Specific fault in that system
Frequently asked questions
Can I keep driving with code U3024?
It depends on which control module has dropped out. If it affects the engine, brakes, or steering, do not continue your trip: call for roadside assistance.
What causes code U3024?
The most common causes are: wiring or relay fault; gateway module routing CAN messages incorrectly; cAN terminating resistor (120 Ω) drifted out of spec.
Related codes
Sources
Values and procedures vary by manufacturer. If it affects brakes, steering, fuel or high voltage, see a professional. Updated: 2026-11-04. How we build these pages.