CodesBrandsGuidesTutorials
EN
EnglishEspañolDeutsch

P0809: Clutch Position Sensor A Circuit Intermittent

The 'Clutch Position Sensor A' family (P0805 circuit to P0809, P080A not learned) means different parts by vehicle generation. GM used P0806–P080A until model year 2018 for the analog clutch pedal sensor of its manual cars, then the newer pedal sensor codes P08A8 ff; Saab's 2012 9-3 does the same. Ford's DPS6 dual clutch uses the family for the electric motor of clutch A. P0809 is documented only for Ford's DPS6 (Fiesta from 2011, Focus from 2012): the motor that operates clutch A carries three Hall sensors, one per phase, and while the motor turns they must produce a fixed sequence; a wrong sequence sets the code. The clutch B counterpart is P087E. The module then loses confidence in the clutch position, so clutch A with the odd gears 1, 3 and 5 is restricted. GM and Saab do not use P0809; Ford publishes no thresholds.

Medium severity. Can I keep driving?Drive gently to a repair shop. If it slips, you hear clunks, or it loses its gears, do not keep driving.

Symptoms

  • Check engine lamp on
  • Jerky or judder take-off
  • Limp mode, odd gears missing

Most likely causes

  • Clutch A actuator motor or its Hall sensors faulty
  • Loose contact at the actuator connector
  • Transmission module Hall evaluation faulty
  • Supply voltage dips

What to check, in order

Start with the simplest. You can tick off each step.

Good to know

  • Repair difficulty: hard
  • It can trigger limp mode.
  • It affects emissions.

What each character of P0809 means

  • P: Powertrain: engine and transmission
  • 0: Generic code: same on every make
  • 8: Transmission
  • 09: Specific fault in that system

Frequently asked questions

Can I keep driving with code P0809?

Drive gently to a repair shop. If it slips, you hear clunks, or it loses its gears, do not keep driving.

What causes code P0809?

The most common causes are: clutch A actuator motor or its Hall sensors faulty; loose contact at the actuator connector; transmission module Hall evaluation faulty.

Related codes

Sources

Values and procedures vary by manufacturer. If it affects brakes, steering, fuel or high voltage, see a professional. Updated: 2026-11-04. How we build these pages.