P0D60: Hybrid/EV Battery Pack Cooling Fan 2 Sense Range/Performance

P0D60 means the feedback of battery cooling fan 2 is electrically present but does not fit what the fan was told to do. Volkswagen documents it for the 2014 Touareg Hybrid: the battery controller reads the fan 2 feedback as a voltage and flags this code when it crosses a limit that moves with the commanded duty, somewhere between 1.37 and 3.43 V; fan 1 is judged the same way under P0BC8. Behind such a mismatch usually sits a fan that turns too slowly or too fast for its command, for example from a worn bearing, debris in the impeller or a blocked intake duct, less often a drifting feedback stage. The reading stays inside its valid window, which separates P0D60 from the hard faults P0D61 (low) and P0D62 (high). Battery temperatures may climb and the system can cut power to protect the pack.

High severity. Can I keep driving?If the car still runs, drive as little as possible and go to a specialized repair shop. Do not touch the orange cables: they carry high voltage.

Symptoms

Hybrid system warning or check engine light
Fan noise that is louder, rougher or weaker than usual
Battery temperature rises faster and electric power is limited

Most likely causes

Fan 2 runs off its commanded speed due to worn bearing or debris on the impeller
Clogged intake grille, filter or duct of the battery cooling air
Drifting speed feedback stage in the fan electronics
High resistance in the feedback or supply connection of fan 2

What to check, in order

Start with the simplest. You can tick off each step.

Read the codes with a hybrid-compatible scanner and write down the freeze frame data
Compare the reading with other engine data while varying the engine speed.
Make sure the battery cooling air intake is clean
Check the 12 V auxiliary battery, which can also trigger warnings
Leave any high-voltage measurements to a specialized repair shop

Good to know

Repair difficulty: medium
It can trigger limp mode.
It affects emissions.

What each character of P0D60 means

P: Powertrain: engine and transmission
0: Generic code: same on every make
D: Subsystem depends on the code range
60: Specific fault in that system

Frequently asked questions

Can I keep driving with code P0D60?

If the car still runs, drive as little as possible and go to a specialized repair shop. Do not touch the orange cables: they carry high voltage.

What causes code P0D60?

The most common causes are: fan 2 runs off its commanded speed due to worn bearing or debris on the impeller; clogged intake grille, filter or duct of the battery cooling air; drifting speed feedback stage in the fan electronics.

Related codes

Sources

Values and procedures vary by manufacturer. If it affects brakes, steering, fuel or high voltage, see a professional. Updated: 2026-11-04. How we build these pages.