P07EE: Transmission Range Multi-Function Select Circuit Range/Performance

'Transmission Range Multi-Function Select' is the multi-bit code of the shift-by-wire selector position: each position produces a fixed pattern of sensor states, and the module checks the pattern for logic errors. Mitsubishi's 2022 CVT with electric shift uses eight sensors (R: 1–2 on, N toward R: 1–5, home: all, N toward D: 4–8, D/M: 7–8). P07EE is the range and plausibility fault of the position code; Mitsubishi assigns it solely to the electric shift module itself – the pattern fits no position or contradicts itself. A generic scan tool shows the fault as P0914 'Gear Shift Position Circuit A'. Shifting is blocked, the drive goes to neutral and the MIL comes on; the usual repair is a software update or the module.

Symptoms

• Vehicle goes to neutral, shifting blocked
• MIL and shift warning
• Generic scan tool shows P0914

Most likely causes

• Electric shift module faulty (hardware or software)
• Outdated module software
• Selector or harness

What to check, in order

Start with the simplest. You can tick off each step.

1. Check the fluid level and condition
2. Compare the reading with other engine data while varying the engine speed.
3. Read the input and output speed in live data
4. Check the connector and wiring
5. Check for other related engine codes
6. Consult the manufacturer's procedure for the transmission

Good to know

• Repair difficulty: hard
• It can trigger limp mode.

What each character of P07EE means

• P: Powertrain: engine and transmission
• 0: Generic code: same on every make
• 7: Transmission
• EE: Specific fault in that system

Frequently asked questions

Can I keep driving with code P07EE?

Drive gently to a repair shop. If it slips, you hear clunks, or it loses its gears, do not keep driving.

What causes code P07EE?

The most common causes are: electric shift module faulty (hardware or software); outdated module software; selector or harness.

Related codes

• P07ECTransmission Range Multi-Function Select Circuit
• P07EDTransmission Range Multi-Function Select Circuit Stuck
• P07EFTransmission Range Multi-Function Select Circuit Low
• P0914Gear Shift Position Circuit A
• P07F2Transmission Range Control Module Communication Circuit

Sources

• mitsubishitechinfo.com: N5040201C000B700USA
• mitsubishitechinfo.com: N5040201F0000600USA
• law.cornell.edu: 13 CCR 1968.2

Values and procedures vary by manufacturer. If it affects brakes, steering, fuel or high voltage, see a professional. Updated: 2026-11-04. How we build these pages.