The current sensor for drive motor A phase X reports a circuit range/performance fault. Phase current measurement is unreliable.
High severity. Can I keep driving?If the car still runs, drive as little as possible and go to a specialized repair shop. Do not touch the orange cables: they carry high voltage.
Symptoms
- EV/hybrid system warning light on
- Reduced motor power or torque
- Possible limp mode or vehicle shutdown
Most likely causes
- Current sensor failed
- Wiring fault
- Sensor element aged beyond calibration window
What to check, in order
Start with the simplest. You can tick off each step.
Good to know
- Repair difficulty: hard
- It can trigger limp mode.
What each character of P2E1C means
- P: Powertrain: engine and transmission
- 2: Generic code: same on every make
- E: Subsystem depends on the code range
- 1C: Specific fault in that system
Frequently asked questions
Can I keep driving with code P2E1C?
If the car still runs, drive as little as possible and go to a specialized repair shop. Do not touch the orange cables: they carry high voltage.
What causes code P2E1C?
The most common causes are: current sensor failed; wiring fault; sensor element aged beyond calibration window.
Related codes
- P2E20Drive Motor A Phase Y Current Sensor Circuit Range/Performance
- P2E24Drive Motor A Phase Z Current Sensor Circuit Range/Performance
- P0BFADrive Motor B Phase W Current Sensor Circuit Range/Performance
- P0BF6Drive Motor B Phase V Current Sensor Circuit Range/Performance
- P0BF2Drive Motor B Phase U Current Sensor Circuit Range/Performance
- P0BEEDrive Motor A Phase W Current Sensor Circuit Range/Performance
- P0BEADrive Motor A Phase V Current Sensor Circuit Range/Performance
- P0BE6Drive Motor A Phase U Current Sensor Circuit Range/Performance
Sources
- github.com: dtc database
- en.wikipedia.org: Power inverter
- en.wikipedia.org: Brushless DC electric motor
Values and procedures vary by manufacturer. If it affects brakes, steering, fuel or high voltage, see a professional. Updated: 2026-11-04. How we build these pages.